1. Throughly clean the surface to remove dirt, oil, grease, and other material that may interfere with adhesion. Wash the surface with a strong detergent, such as Tri-Sodium Phosphate (TSP) or Formula 409. Then Rinse the surface.
2. If the tile has a high gloss, lightly scuff sand with 150-220 grit sandpaper. Use a damp cloth to remove the sanding dust.
3. A specialty primer is needed to adhere to ceramic tile. Do Not use a regular wall primer. We recommend either Graham's 320 Blockout primer or Stix, which is a primer made by Insl-X. Brush, roll or spray on the primer and let dry for at least 4 hours. The primer may be sanded to acheive a smooth finish.
4. Apply two coats of Aqua Borne Ceramic paint in either a full gloss or satin sheen, waiting at least 4 hours between coats.
These products may be applied by brush, roller or spray. Color possibilities with Graham Paint are endless, as we can match competitors paint samples, fabrics, carpeting, etc.
